Countdowns, summons and the scene
Environments and many adversaries run on countdowns and bring creatures in. This page covers the Countdown and Summon Creature steps, the rule that answers a countdown moving, and the counts the table works out as a card plays.
The Countdown step
Section titled “The Countdown step”Its Action says what it does to the clock named in Clock name. Other cards find the clock by that name, so keep it the same on every card (“Open Water”).
- Start a clock — its Segments, Loop on completion, and what it
Advances on: your game’s own moments — each spotlight change, when its
owner is spotlighted, each action roll a PC makes (with the standard,
progress or consequence chart, in Each roll moves it), when a PC rolls
with Fear, or by hand.
- Segments can be dice, rolled as the clock starts: Accursed Caress’s “Doom Countdown (1d6+1)”. A looping clock sized by dice rolls them again each time it starts over (Hallucinatory Breath’s “Loop 1d6”).
- Loop on completion can be Decreasing — each loop one shorter, until it runs out: All-Consuming Rage’s countdown starts over one shorter each time it triggers, and when it would start over at nothing, it runs out instead.
- Advance a clock by its Ticks — a number, or dice (“tick it down by 1d4”). The tick that fills it completes it, so a Countdown completed route is “when the countdown triggers”.
- Tick a clock back (away from completing) — Fall’s “tick up the countdown by 2”. Daggerheart’s countdowns count down, so “up” is away from triggering. It never goes past empty.
- Pause a clock and Resume a paused clock — Stormheart: “Until this adversary is defeated, the ‘Stormfront’ countdown doesn’t tick down.” Nothing moves a paused clock until it’s resumed.
- Check a clock (route on it) — changes nothing, and routes on what it
finds. Reads is What it has left (how Daggerheart reads a countdown)
or The ticks marked. Add band for each range you route on: Fall’s
“1d12 physical damage if the countdown is between 8 and 12, 2d12 between 4
and 7, and 3d12 at 3 or lower” is three bands, each routed to its own
damage step. With no bands, it routes on It has triggered (it has filled
at least once, a looping clock included), Paused or Still running.
Note it as keeps the number for a later step (
@countdown_left). - Reset a clock and Stop (remove) a clock.
One for each creature keeps a separate clock for each creature the step is aimed at: Death Glare’s “Activate a Doom Countdown (4)” for each PC it reaches. At the table each one is named for its creature (“Doom Countdown — Maren”). Advancing or stopping with nobody aimed at reaches every clock of that name.
Ask which countdown (for anything but a start) asks the GM which of the countdowns running it moves: Imperial Decree’s “tick down a long-term countdown related to the empire’s agenda”. With only one running it moves that one, and with none it uses Clock name. A countdown kept for each creature isn’t offered.
When a countdown moves
Section titled “When a countdown moves”The trigger When a Countdown Moves offers a rule as a countdown moves. Give The countdown its name, as the card that starts it does, and choose When it Completes (triggers), Ticks toward completing or Runs out (a decreasing one reaches 0). For ticks, Only when what’s left is narrows it to An odd number or An even number.
Only one this card started answers just the clock this card’s own step started. Use it when two creatures can each run a countdown of the same name, such as two Doom Countdowns. For a clock kept for one creature, the rule is aimed at that creature, so its doom lands on the PC whose countdown it was.
- Exfiltration: “When the Progress Countdown triggers…” — Completes (triggers).
- Foul Weather: “When the Open Water Countdown ticks down to an odd number, roll a d6…” — Ticks toward completing, An odd number.
At the table it’s offered to whoever holds the card — “The Open Water countdown ticks down to 3” — whatever moved the clock: the table’s own ticking, a card, or the GM’s click. It never fires on its own. An environment’s rules need the environment seated in the scene; see Environments at the table.
Summons
Section titled “Summons”A Summon Creature step names the creature, or leaves it open:
- Or ask which at play — for a card that names none: Reinforcements!’ “two adversaries of your choice”. Type what to ask for; whoever plays the card picks from the scene’s creatures and the game’s adversaries. It’s also asked when the card’s creature field is empty.
- Count — a number, a field, or dice (1d4), rolled at play.
@scene.pcsis the number of PCs in the scene: “a number of Tier 3 Minions equal to the number of PCs”. - That many times over — “two for each PC”: the count this many times, each rolled anew.
- Where they appear — Around the user (or the play’s point), Around the targets (a chosen PC) or Around the user. With the last two, Within sets how far: Reinforcements!’ “within Far range of a chosen PC”.
- Lasts for — how long they stay.
Its routes include None to summon (a count that came to nothing) and No creature chosen.
Counting creatures
Section titled “Counting creatures”A Count Creatures step counts who stands near, and notes the number in Note it as for a later step to read.
- Around — You, or Each target, which gives a count for each
target, read as
@target.and the name: a reaction roll’s Difficulty bonus for each target. - Within — how far.
- Who counts — Your allies, Your enemies or Anyone.
- Only your own kind — the same stat block as you: “other Sirens”, “Bladed Guards”.
- In a chain from you — each one within range of another one counted. Shield Wall’s “Bladed Guards standing in a line… each within Melee range of another guard” is a chain within Melee, with Count yourself too and At least 2 (a guard alone is no line).
- Each one can join, at a price — Enchanting Song’s “Other Sirens within Close range of the target can mark a Stress to each add a +1 bonus”. The one playing is asked how many join, and which. Each one that joins pays, and only those who do count.
Its routes are Somebody counted and Nobody counted.
Numbers the table fills in
Section titled “Numbers the table fills in”Some values aren’t on the card. The table works them out as the card plays, and a box that reads one names it in the note beside its label:
| Value | In the link button’s list | What it is |
|---|---|---|
@scene.pcs |
The number of PCs in the scene | The number of PCs in the scene. Relentless (X)’s “X is the number of PCs in the scene” reads it too, so the GM’s spotlight count follows the board. |
@gm.fear |
The Fear in the GM’s pool | The Fear in the GM’s pool as the card is played (Daggerheart): Umbral Veil’s tokens; Avatar of Terror’s d6 per Fear is a bonus’s for each… count. |
@scene.highest_difficulty |
The highest Difficulty among the adversaries in the scene | Relative Strength’s “The Difficulty of this environment equals that of the adversary with the highest Difficulty”, as the card is played. |
@targets.count |
The number of targets | How many creatures the card is aimed at right now — “a Fear for each PC within Very Close range” after an area picks them. |
@save.failed |
How many failed the Reaction Roll | How many targets failed the last Reaction Roll — “You gain a Fear for each target who failed” (Arcane Reflection). |
@save.succeeded |
How many succeeded on the Reaction Roll | How many succeeded. |
@trigger.total |
The triggering roll’s total | The total of the roll that set the rule off. |
@card_tokens |
Tokens on this card | The tokens on this card now, listed by the pool’s own name when it has one (Favor on this card); @pool.<name> for another of the card’s pools. |
@target.stacks.<condition> |
Vulnerable — how many | How many stacks of a condition each target has. |
@resource.stress.marked |
Stress — marked | The Stress whoever plays the card has marked; @target.resource.stress.marked is the target’s. |
A message can show one in its words: write it in braces, as
{@scene.highest_difficulty} or {@target.ac}. “This environment’s
Difficulty is {@scene.highest_difficulty}” posts “This environment’s
Difficulty is 17”. A value the card can’t read stays as written.
To use one in a step, click the link button beside a number box, then the value that takes the box’s place: the list has them under their own headings — From the scene, From the roll that set this off, From the Reaction Roll before this step, On this card, Pools of whoever plays the card, The target’s pools and Conditions on the target.
A number box that reads a value also has at least (minimum) under its fallback. Strategic Approach’s “a number of tokens equal to your Knowledge on this card (minimum 1)” reads Knowledge with a minimum of 1, so a Knowledge of 0 or less still places one.