Jungle treetops battle maps
A treetops battle map is a fight up in the canopy of a jungle. Platforms are built round giant trunks, joined by rope and plank bridges, with treehouses on some of them. The forest floor lies far below, with its stream and undergrowth, and you see it through the gaps between the platforms.
Start one
Section titled “Start one”-
Start a battle map and choose to draw it yourself.
-
Pick Jungle treetops from the grounds.
-
Move the frame to the stretch of canopy you want to fight in.
The map has a whole forest of platforms, laid out for you. The frame is the part that becomes the battle map, so move it until it holds the platforms and bridges your fight needs.
What’s up there
Section titled “What’s up there”- Platforms stand at two heights, 30 ft and 40 ft up, unless you set them otherwise. Platforms close together are usually at the same height. Each one is built round its trunk, with a railing round its edge.
- Bridges join the platforms: rope bridges with gaps between their slats, and plank bridges. A bridge between platforms at different heights slopes from one to the other.
- Treehouses stand on some platforms, their doors facing the trunk.
- Ways down: a spiral stair winds round a trunk, coming up through an opening in the platform. Ladders and rope ladders hang from platform edges. Every platform has a way down on it or one bridge away.
- The canopy fills the gaps between the platforms, but never covers a platform or a bridge.
- The forest floor is far below: a stream, tree ferns, bananas, bamboo, fallen logs and the great trees’ roots. It’s shaded and softened by the height, so the platforms stand out.
Set it up
Section titled “Set it up”The Ground panel has a Treetops group of its own. Each change lays the treetops out again:
- Highest platforms — how high the top platforms stand, 10 ft to 80 ft.
- Heights — platforms at one, two or three heights, each 10 ft below the last. The lowest stand at least 10 ft up, so a low top leaves room for fewer.
- Platforms and Treehouses — how many of the great trees carry a platform, and how many platforms carry a treehouse.
- Bridges — rope, plank, or both.
- Canopy — how thick the leaves stand over everything.
- Stream below — a stream through the forest floor, or none.
Change it
Section titled “Change it”You change a treetops map with the Edit tool, as you would any battle map you draw yourself.
-
Draw a platform with Areas → Platform. Set its Floor height and whether it’s Railed first, then click its corners and click the first one again (or press Enter) to close it, or pick a Shape and drag it out.
-
Draw a bridge with Lines → Bridge. Choose Rope or Planks under Between raised floors, then drag from one platform’s edge to another’s (or click one and then the other). A bridge is at most about 50 ft long, climbs at most 20 ft, and can’t cross another platform or run through a trunk. When one can’t be made, the panel says why.
-
Select a platform to change its floor height or its rail, and select a bridge to change what it’s made of (or make it a beam) and how much it sags.
-
Move a platform and everything on it comes too: its treehouse, its trunk, the ladders hanging from it. The bridges’ ends follow it.
-
Delete a platform, and the bridges to it go with it.
-
Add a way down from the Battle map shelf of stamps. A Ladder or a Rope ladder set down near a platform hangs from its nearest edge, turned outwards. A Spiral stair set down near a trunk winds round it.
-
Add a treehouse by setting a building down on a platform.
-
Add a great trunk from the Battle map shelf too.
The preview
Section titled “The preview”The Battle map panel’s preview has a View from list: see the map from the forest floor or from one height of platforms, with what’s above it cut away, as a player standing there sees it. The battle map you make always has every level. The download is a zip.
In PostRoll
Section titled “In PostRoll”Create scene makes the battle map one scene with its levels: the forest floor, each height of platforms, and the canopy over them. Each player sees the map from their own token’s level — from a platform, the forest floor shows through the gaps below, softened by the depth.
- Ladders and rope ladders offer the climb when a token’s move ends at one; spiral stairs and sloping bridges take it up or down at once.
- The platforms’ edges and the bridges’ sides stop a token on that level but not its sight, so nobody walks off by accident. To step off on purpose, use Jump Down on the token.
- Walls, light, cover and fog work level by level: the treehouses’ walls stand on their platforms, a lantern on a deck lights the deck, and the forest floor has its own fog.
- The leaves over the platforms are a layer of their own, above the treehouse roofs, softened round the tokens under them like the canopy.
- At the map’s edge, a platform, treehouse or crown the edge cuts through is shown whole. A bridge leading off the map still stops there.
- In the Diorama (the table tipped in 3D), a bridge between two heights slopes between them.
When you first open the scene, a note names its levels and counts the ways up between them; Pick a level chooses the one you see the map from. Moving between levels covers climbing and falling in play.
You can also Download the battle map, a zip, and bring it into a scene with Import Scene later: drop the whole zip in, and it comes in as the same one scene.
In another VTT
Section titled “In another VTT”The zip holds two maps for other VTTs:
- The treetops, the map as you see it. Its walls are the treehouses and the great trunks.
- The forest floor, the floor’s own picture with its own walls: the trunks’ roots, and anything built down there.
Use them as two scenes, and switch when someone climbs down, or falls.
With Video for other VTTs on, the download is a looping video of the
treetops instead, with its walls and doors in a .dd2vtt: the river and the
trees far below moving under the platforms, and the canopy’s crowns swaying
overhead. It takes a few minutes.
Falling
Section titled “Falling”A fall from the platforms is a long one. In D&D 5e, a creature takes 1d6 bludgeoning damage for every 10 ft it falls, so 3d6 from a 30 ft platform and 4d6 from a 40 ft one. In Pathfinder 2e, it takes bludgeoning damage equal to half the distance it fell: 15 from 30 ft, 20 from 40 ft. In PostRoll, a fall goes to the GM to confirm, with that damage offered as a roll.
Not yet
Section titled “Not yet”- Themes, night lighting and the drawn looks aren’t tuned for the platforms yet.