Village maps
Village draws a small place close up, as an illustrated plan — its lanes, cottages, church, inn and mill, and the fields and woods around — at walking scale, so every house, gate and haystack has room.
-
On the Map Foundry page, click Village — or open one from your regional map (below).
-
Pick a starting point from its Places — Riverside crossroads, Fishing cove, Hilltop hamlet and more — or Surprise me. Each card shows the village you get, on its own seed and in its own look, and the editor opens already drawing it.
-
Adjust it in the Village panel, then Save as scene… or keep it in My maps.
To begin again later, open the ⋯ menu in the toolbar and choose New map…. Keep this one closes the gallery onto the village you have.
The Village panel
Section titled “The Village panel”The panel has four sections. Each opens and closes on its own, and stays the way you left it.
- Setting — where it stands and the ground under it. (On a battle map drawn by hand, this is Ground, and there’s no Village layout.)
- Village layout — its streets, size, landmarks and houses.
- Style — how it’s drawn: its look, ink, its Sky and its shadows.
- Map — the sheet’s shape and its seed.
Opening a village from your regional map
Section titled “Opening a village from your regional map”Select a hamlet or village in the Decorate tool and click Open as village map. It opens in a new tab; your regional map stays as it was. Towns and anything bigger open as town maps.
- Its ground is the region’s, and the village stands where its mark is. Its site comes from the region too, so the Site cards are replaced by the region’s crop.
- Its size comes from its rank. A harbour village packs round its square.
- Its name titles the map and the scene.
Opening it again gives the same village. Once saved, Open saved village appears beside the button, and a scene saved to the region’s world links to the village’s entry.
Setting: where it stands
Section titled “Setting: where it stands”- Site — Inland, River (built on both banks, with bridges), Lake (with a landing stage), Coast (jetties, rocks and reefs offshore), Island, Oasis (a spring-fed pool in dry country) or Fen (islands joined by plank walks, its homes reed huts on stilts).
- The water slider changes with the site: River width, Lake size, Sea, Island size, Pool size or Open water. An inland village has none — add ponds with the Edit tool’s Areas (a Lake).
- Ground — Rolling, Hilltop, Ridge and more, with Rise for how pronounced it is. Shape it on the map opens the Edit tool’s Ground, where you can drag the ground’s shape, the village’s heart, the roads and the side the water lies on.
- Woodland, Brooks and Climate — how wooded, how many streams, and what grows.
Village layout: how it’s laid out
Section titled “Village layout: how it’s laid out”-
Layout — how the houses are arranged:
- Crossroads strings the houses along the roads that meet there.
- Cluster packs them round a square and a loop lane.
- Street lines one long street with narrow plots, long gardens behind.
- Green splits the road into two lanes round a long village green, the houses facing it.
- Scattered sets farmsteads apart along winding roads and lanes.
- Terraced steps an upper and a lower village up a slope.
- Oasis crescent curves round an oasis’s pool.
A layout that can’t stand on the site is greyed out — an oasis gathers round its water, and a fen has no slope to terrace. If changing the site leaves your layout without ground, the panel picks the nearest one and says so.
-
Size — a Hamlet is a handful of farms; a Village has its church, inn and smithy.
-
Roads out and Roads — how many roads lead out, and whether they run Direct, Winding or Meandering. Either way they keep to the ground: a lane too steep to climb straight winds up the hillside, the loop lane follows the slope round, a fen’s plank walks step from islet to islet, and the hedges keep beside the roads round every bend.
-
Landmark — a church, a castle, a temple, a crypt, a monument or none, and how grand.
-
Ruins — a ruined stepped temple in its broken-walled precinct, out past the houses on the highest gentle ground it can find, with steles, an idol and fallen columns, now and then a great stone head, and a lone stone or two further out. Auto lays them in tropical country; Some lays them anywhere. They’re named in the key, and the Jungle look draws them under creepers and moss — any other look as weathered stone. A village made before ruins existed keeps None.
-
Manor house and Mill — a village on a brook big enough to turn a wheel gets a watermill by its race; one without gets a windmill on a rise by one of its roads. No leaves the mill out.
-
Density, Fields, Gardens and trees, Houses and Roofs — how packed, how much farmland, how green, and what it’s built of.
The look — the same list of styles as every map, with the ones made for towns and villages first — changes how the village is drawn, not the village. So does its Sky: the season, the time of day and the weather, set from the Sky in the toolbar or the Sky row under Style. See Village looks and Time of day and weather.
Editing a village
Section titled “Editing a village”Choose Edit in the toolbar to change the village one thing at a time: move, turn and resize houses, add or take away buildings, trees and props, draw paths and fences, shape the ground, rebuild a house or rename a road. Your edits stay when you change the settings above. See Editing a village.
Title and key
Section titled “Title and key”A village map reads “The Village of …” (or “The Hamlet of …”) in a corner, with a numbered Key of its landmarks and named farms — the numbers stand on the buildings. Turn the key off with Key in the Decorate tool, and edit the title there like any other.
Saving to a scene
Section titled “Saving to a scene”The Village card in the save dialog brings its named roads across as paths, its green and named fields as faint regions, and its landmarks and named farms as pins. With Create entity stubs on, each pin arrives in your world as a place, ready for its wiki page.