Atmosphere scenes
An atmosphere scene is a full-screen, living backdrop for the moments that don’t need a battle map: arriving at a harbour at dusk, a storm breaking over the pass, a throne room falling silent. There’s no grid and no tokens, just the picture, gently alive, and a set of looks you switch between as the story moves.
Make one
Section titled “Make one”- Create a scene and choose the Atmosphere type (see Creating a scene).
- Upload your picture, such as a painting or an establishing shot.
- Open it. The picture fills the screen, drifting slowly, ready to run.
Every atmosphere scene starts with four looks — Day, Dusk, Night and Storm — so one picture already covers a whole day and a change of weather.
From a map
Section titled “From a map”If your world’s maps come from the Map Foundry, a scene can start from a point on one: where the view is from, which way it looks, and how high. PostRoll works out what’s in view, such as the range on the skyline, the river below, or the town you’re standing in. It names the scene and writes its caption from the map’s own names. It doesn’t paint the picture: you still add one, painted or chosen to match.
There are three ways in:
- In the Map Foundry, right-click the map and choose View from here… (on a mountain range, View of the range…). Frame the view, then choose Create atmosphere scene. The new scene opens in its editor, ready for its picture.
- On a world map the Map Foundry drew, right-click as the GM, choose View from here, and flick toward the direction to look. From the list menu, pick Look north, Look north-east and so on.
- On an atmosphere scene you already have, open the editor’s Map point tab and choose Link to a map point…. Pick one of your world’s maps or one of your own Map Foundry maps, then click where the view is from.
Framing the view. A plain, clay-coloured preview shows what the camera sees, with the names of what’s in view.
- Drag the dot on the map to stand somewhere else, and the handle along the view to turn.
- Height runs from standing on the hillside to 450 m up. Where the bar under it turns amber, the ground hides what you’re looking at.
- Best view from here keeps you where you are and turns to the best view. Find a good vantage looks for a better spot nearby.
- While the panel has focus, the arrow keys turn and step, and
[and]change the height. - What you’ll see lists what’s in view, which way, and how far.
Suggestions. From the view, PostRoll suggests how to set the scene: the sun for your map’s climate, wind from the map’s prevailing wind, rain or snow when the view calls for it, mist over marsh and lakes, birds over coast and forest, and the caption. Each says why. Tick what you want:
- On a new scene, they’re applied when it’s made.
- On a linked scene, Apply in the Map point tab adds them as one step you can undo. Applying again updates them rather than adding them twice.
- Some need a spot in your picture, like smoke above a village you can see. The tab lists those with a Place button.
The link saves with the backdrop. Relink… takes a new view and Unlink removes it.
Bring it to life
Section titled “Bring it to life”Open the scene and choose Edit the backdrop (the pencil in the controls along the bottom). The editor shows the backdrop playing as your table will see it. Preview plays it; Picture shows one layer flat, for painting and placing things.
Layers. Add more pictures and stack them far to near: a sky, the mountains, the town, a foreground of reeds. Each layer has a depth, and how much it follows the slow camera drift. Letting far layers move less than near ones is what makes the scene read as deep. Leave out on phones drops a layer where the device is short of memory.
What moves. Pick a layer, add a region (Water, Foliage, Sky, Fire, Heat haze, Smoke, Fog, or Wind in the grass), then paint where it is:
| Tool | Use it for |
|---|---|
| Brush (B) and Eraser (E) | Painting and rubbing out. The right mouse button erases too. [ and ] change the size. |
| Lasso (L) | Drawing round an area. |
| Wand (W) | Clicking a colour to take everything like it. Touching keeps to connected areas. |
| Sky | Selects the sky from the top edge down to the horizon. |
| Grow, Shrink, Soften, Invert, Clear | Tidying the whole region. |
Each region has its own speed, strength and scale. Ripples and sway follow the wind unless you set a direction of their own. A layer holds up to three painted regions.
Effects. Place chimney smoke or embers by clicking where they rise from. Birds, crows, mist and snow fill the whole view. Drag a marker to move its effect.
Looks. Change any look’s weather, wind, time of day, mood, fog and colour grade, choose which effects run in it, copy it to make a new one, or choose which look the scene opens in. You can have up to nine looks.
Framing. Drag the start and end framings of the camera drift, and the focal point a phone keeps in view. Set how long one drift takes, add a caption that introduces the place, and choose a canvas or paper grain.
Press Save (⌘S or Ctrl+S). In a room, everyone’s screen picks up the change straight away. Undo and Redo (⌘Z, ⇧⌘Z) cover strokes and settings alike.
Run it at the table
Section titled “Run it at the table”Switch your room to the scene like any other (see Your room hub). Everyone at the table sees the same backdrop. The controls along the bottom are yours alone:
| Control | What it does |
|---|---|
| Looks | Switch between Day, Dusk, Night and Storm. The change fades in over a second or two. Keys 1–9 pick looks too. |
| Weather | Change the weather and its intensity, and scrub the time of day. |
| Moments | One-off beats: Lightning (key L), Flash, Gust, Quake and Embers. |
| Layers | On scenes with several layers or effects, switch each one on or off. |
| Back to the look | Undo your live changes and return to the look as it was. |
| Stage | Try looks on your own screen first. Send puts the one you’ve chosen up for the table. |
| Edit the backdrop | Opens the editor, if the scene is yours to edit. |
| Scenes | Open the scene list to move on, to a battle map or anywhere else. |
A storm keeps its own lightning. Strikes are timed the same for everyone, so the whole table sees the flash together.
Give each look its sound
Section titled “Give each look its sound”A look can bring its own sound: rain for Storm, crickets for Night, birdsong for Day. When you switch looks at the table, the old look’s sound fades out as the new one fades in. Sound that suits every look, like a river running through the valley, plays straight on.
- Open Edit the backdrop and go to Looks.
- Pick a look. Under it, Sound in that look takes a soundscape, ambience or music from your library.
- Sound in every look, just below, holds what plays under all of them.
A look you’ve just added gets its sound once you’ve saved the backdrop.
At the table, start the scene’s sound with Play scene or Auto in table audio. From then on, each look change brings its own sound with it.
- Stop silences everything until you play the scene again, even if you change looks in the meantime.
- A look you’ve staged changes nothing the table hears until you Send it.
- The sound you attach is yours: it plays when you run the scene. A co-GM running it hears their own.
What players see
Section titled “What players see”Players see just the backdrop, with no controls. If they join late, they arrive on whatever look and weather you’ve set. Each player also has a small Reduce motion button in the corner, which holds the picture still for them without changing anything for anyone else.
On phones and slower devices
Section titled “On phones and slower devices”PostRoll adjusts the backdrop to the device. Phones get a lighter version with the same picture, looks and weather. A device set to reduce motion gets a still picture that still fades between looks as night falls. Nobody needs to change a setting.
Bake it for phones
Section titled “Bake it for phones”A phone runs a backdrop best as a video. In the editor, open Looks, choose a look, and under For phones press Bake for phones. PostRoll records half a minute of that look as a seamless loop, which takes about as long as the loop itself. Keep the tab in front while it records.
From then on, phones and tablets play that look as the video. It’s lighter on their battery and memory, and looks just as it does on your screen. The slow camera drift and a storm’s lightning still happen on top, in time with everyone else.
- Bake each look you’ll use. A look without a bake is still drawn live on phones.
- Save before you bake. A bake records the saved backdrop. If you change the pictures, the regions, the effects or that look afterwards, the bake is marked out of date and phones draw the look live until you press Bake again.
- Live tweaks. While you tweak the weather or switch a layer off during play, phones draw the scene live so they show your change. They go back to the video when you return to the look.
- Limits and storage. Each bake is a video of around 8 MB and counts toward your storage, up to four per scene. Remove deletes one.
On a board
Section titled “On a board”Embed an atmosphere scene on a board and it shows as its picture, in the look you last left it on, with its caption, but not animated. If that look is baked, the embed shows the baked frame and plays the video while your pointer rests on it.
Related
Section titled “Related”- Scenes & battle maps — the three scene types.
- Creating a scene — making any scene.
- Your room hub — choosing what your table sees.
- Atmosphere and weather — weather on a battle map.
- Map Foundry — generating the maps a view is taken from.