Skip to content

Walls, lines, areas and the brush

The Edit tool draws by what you’re drawing: Walls for what’s built as a wall, Lines for everything else you draw along, Areas for filled outlines, and the Brush for painting the ground. Every choice shows a small picture of what it makes, so you can choose by eye before you draw. On a battle map with a theme, another season or another look, the pictures are painted again in it while you work, one by one, so a road in a swamp shows as the swamp paints it.

Tool Key Draws
Walls W Stone, mud and dry-stone walls, a Building, a Room or a Passage, and Doors & windows. Inside a house with its roof off, a wall is one of its walls.
Lines L Ways (road, lane, track, footpath, worn path), water (stream, ditch), edges (cliff, bank), hedges and fences, a tree line, bunting, a bridge.
Areas A Woods, an orchard, a reed bed, a lake, the sea, a field, paving, a raised platform, and a Region for the table.
Brush P K U Ground (mud, gravel, moss…), Growth (forest, rocky ground, ruins, a garden) and Height (raise, lower, flatten, smooth, terrace, step).
Erase E What you set down and what you drew, and in the battle map editor what you painted.

Each tool picks up what you last drew with it. A hedge or a path drawn across a house with its roof off stays outside; only a wall drawn there is one of the house’s walls.

A Region decides how tokens move at the table: choose its Going, Hard going, Swim or No way through.

  • Drag to draw freehand.
  • Click corner after corner. Click the first corner again to close an outline, or double-click or press Enter to finish.
  • Turn on Pen to draw curves: click for a sharp corner, or drag to pull a curve’s handles out. It works on lines, walls, buildings, rooms and areas.
  • Backspace takes the last corner back; Esc drops what you’re drawing.
  • Hold Shift to keep a corner square to the grid, or ⌘ (Ctrl) to draw free of any snapping.

A curved wall inside a house is built as short straight lengths along the curve, none shorter than a doorway, so a door still fits anywhere in it. You pick it, change it and delete it as one wall.

Buildings, rooms, areas and the walls inside a house have a Shape row: Freehand, Rectangle, Circle, Ring, Triangle, Pentagon, Hexagon, Octagon, L shape, T shape and Cross.

  1. Pick a shape.
  2. Choose Drag from: Corner or Middle.
  3. Drag it out on the map. Hold Alt to drag from the other one, and Shift to keep its sides even.

The shape stays picked, so the next drag draws another. Dragged up or to the left, an L, a T or a triangle turns over. Pick Freehand to draw your own outline again.

A Ring depends on what you draw:

  • A building or a room becomes a ring of rooms round an open courtyard, its gateway facing where you started the drag.
  • Woods, an orchard, a reed bed, paving or a region leave a clearing in the middle; a lake leaves an island. At the table, a region’s middle is open ground.
  • Walls inside a house make two rings, one inside the other.

Choose Bridge in Lines and drag it from one side to the other: over a stream, a ditch, a chasm or open ground, with no way needed to it. Before you draw, pick its Kind (humpback, stone arches, clapper, timber trestle, covered, planks, rope or boardwalk), its Width (Footbridge, Cart or Road) and its State. Select it afterwards to change them, or drag either end to move that end.

An end dragged onto the end of a way meets it, so the way runs on over the bridge. Dragged from one raised floor’s edge to another’s, it’s a bridge between the two, of rope or planks (Between raised floors).

At the table its deck is walked across, whatever is under it, and its sides over the water stop a token, so it comes off at the ends. With Raised floors on, a stone bridge’s deck is a level 10 ft up and a timber one stays on the ground; change In a scene to choose otherwise.

A point you draw catches on the ends and edges of what’s already there: a ring shows when it catches on an end or a corner, a dot when it catches along an edge.

What meets is joined: a path drawn on from the end of another becomes one path, and woods drawn over woods become one wood. An area drawn against an area of another kind stops at its edge, so the two share a border.

In the battle map editor, turn these off in the View menu: Snap to drawings (N) and Join what meets (J). On a village or a town map they’re under Drawing on the Walls, Lines and Areas cards. In the battle map editor, walls and buildings always catch, so walls still meet cleanly.

Inside a house with its roof off, a wall you draw catches on the ends of the walls already there and on the room’s corners first, then anywhere along a wall, then the house’s grid. Hold ⌘ (Ctrl) to draw it free.

Choose what Erase takes: Things set down (trees, props, pictures, buildings), Drawn (Walls, Lines, Areas), and in the battle map editor Painted (Ground, Growth, Height). A wall, a line or an area the eraser touches goes whole; paint goes where you brush. One undo puts back the whole stroke.

In the battle map editor, what you draw has an At the table row: what it does to a token when the battle map becomes a scene. Its recommended choice is picked to start with, and named under the row.

  • Going, for areas, streams and ditches, and the ground you paint: Open, Hard going, Swim or No way through. Swim is hard going at the table, which has no swimming of its own.
  • Stops, for walls, hedges and fences, cliffs and banks: Sight and movement (a wall), Movement only (a ledge, seen over but not crossed) or Nothing.

Set it on the card before you draw, or select what you drew and change it there. Back to recommended undoes your choice. Painted deep water is swum, and a cliff is a ledge, unless you choose otherwise.

In the battle map editor, the battle map is painted again after each change. What you changed is marked with a moving outline straight away, Painting… fills as the new picture is painted, and the picture fills in from the change outwards.