Ship schematics
A ship schematic is an artifact that prints a starship the way a shipyard’s drawing office would. You can print one deck as a working plan, every deck stacked over the ship’s side profile, or the whole hull from outside with its parts named.
Making one
Section titled “Making one”- Choose New artifact and pick Ship schematic.
- The sheet starts on the sample ship. Under Ship, at the top of the Words panel, pick another if your world has one.
- Choose a Template under Look, and how it’s Printed as.
- Write over any of the words: the ship’s name, the specification, the crew, the notes, the title block.
The templates
Section titled “The templates”Under Look, Template chooses what the sheet draws:
- Drafting sheet: one deck as a working drawing, with a zoned border, a title block, revisions, general notes, a schedule of compartments and a small side view showing which deck it is.
- Manual plate: one deck as a page from the ship’s manual, with a running head, a figure caption, a room key and a page number.
- Deck card: one deck as large as the card holds, with a band and a compact key, for a quick reference at the table.
- General arrangement: every deck stacked, lined up along the ship, over its side profile with the decks marked.
- Exterior poster: the hull from above, below, both sides, ahead and astern, with its parts named, close-ups of a few of them, the ship’s specification, crew and emblem, and the builder’s title block.
For the three one-deck templates, Deck under Ship picks the deck. On the sheet switches each piece of the marginalia on or off, from room names and door codes to the crew list and the insignia. Anything you switch off gives its room back to the drawing.
Printed as
Section titled “Printed as”Any template can be printed in one of four ways:
- Black on white: black ink on the world’s own paper.
- White on black: white ink on black card.
- Blueline: blue lines on pale paper, like a diazo print.
- Blueprint: white lines on deep blue, like a cyanotype.
The last three bring their own paper, so Paper is hidden while they’re chosen. Stamps and seals keep their own colours: a red APPROVED on a blueprint is how a real one looked.
The words
Section titled “The words”Every word starts filled in. The name, dimensions, decks, berths and lifeboats come from the ship. The builder, owner, drives, crew and notes are made up for it, and every sheet of the same ship agrees on them, so its crew list doesn’t change from one handout to the next. Anything you write over is kept.
When the ship changes
Section titled “When the ship changes”A schematic follows the ship as it’s saved. If the ship is saved again after the sheet was laid out, the Ship field says so and offers Update, which lays the sheet out again on the ship as it is now, keeping your words and choices. A sheet shown to players keeps drawing even if the ship is later deleted.
Showing and printing it
Section titled “Showing and printing it”A ship schematic is shown at the table, printed and saved like any other artifact: see Artifacts. Players who are shown it see the drawings on the sheet and nothing else: a room name you switched off isn’t sent to them at all.
A very large poster is saved as a PNG or PDF at a little under 300 dpi, and the Export window says so.